Simtronics TLU 600 - Technical Specifications; Maintenance and Handling; Cleaning Procedures; Battery Unit Replacement

TLU 600/610
Page 15/20 NOSP 14540-04 (JULY 2011)
4.
4.4.
4. TECHNI
TECHNITECHNI
TECHNICAL SP
CAL SPCAL SP
CAL SPECIFICATIONS
ECIFICATIONSECIFICATIONS
ECIFICATIONS
• Operating temperature: -20°C to 50°C,
• Self-powered operation: 4 hours,
• Power supply: Rechargeable NiMH batteries,
• Dimensions (maxima): 230 Long x 120 Wide x 70 Deep,
• Weight: 0.85 kg.
5.
5.5.
5. M
MM
MAINTENANCE
AINTENANCEAINTENANCE
AINTENANCE
To be done out of ATEX area
5.1.
5.1.5.1.
5.1. C
CC
C LEANING
LEANINGLEANING
LEANING
Take care not to scratch the infra-red communication window.
5.2.
5.2.5.2.
5.2. C
CC
C HANGING A BATTERY UN
HANGING A BATTERY UNHANGING A BATTERY UN
HANGING A BATTERY UNIT
ITIT
IT
To change the battery unit:
- remove the battery compartment by undoing the 6 cross-head screws.
- Disconnect the link connector.
- Change the unit.
- Reconnect the link cord making sure the connector is the right way round.
- Coil the cord into the space between the body and the battery unit.
- Refit the compartment using the 6 screws, taking care to avoid pinching the wires or
damaging the waterproof seals.
6.
6.6.
6. PACKAGING AND
PACKAGING AND PACKAGING AND
PACKAGING AND TRANSPORT
TRANSPORTTRANSPORT
TRANSPORT
Whenever the equipment is to be transported (for repair, etc.), it is advisable to pack the
remote controller and its accessories in their original packaging.
7.
7.7.
7. S
SS
STORAGE
TORAGETORAGE
TORAGE
Store the remote controller in a dry, dust-free area at a temperature in the range -25 to
+50°C.