Simu Hz TIMER - User Manual

The Hz TIMER is a radio transmitter used to derive remote Hz
receivers or Hz motors with a built-in receiver. It is used to issue
individual, group or general controls.
This timer features 5 operating modes:
1 daily or weekly mode (e.g.: ▼ 20:00)
2 cosmic modes “COS1”and “COS2”, according to sunrise and sunset.
1 security mode “SEC” to simulate presence.
1 “
OFF” mode, without closing nor opening time setting.
Technical specifications :
- Power supply : 2 AAA LR 03 1,5Vdc batteries.
- Frequency : 433 MHz
- Range : 200m in free field or 20 between 2 reinforced concrete walls.
- Operating temperature : +5°C / +40°C (indoor use only).
- Storage temperature : 0°C / +70°C
- Protection index : IP 30
- Operating reserve: unlimited for programming, time and date setting
when changing batteries.
- Weight : 145gr.
1-
Remove car
efully the front cover using a flat
screwdriver.
2- Unclip the timer from its basis.
3- remove the insulation pad.
4- The timer is in
“OFF” mode. To set the
clock, press the “
-” key
Hz TIMER - Réf.: 2004960
GB
S.A.S. au capital de 5 000 000 € - Z.I. Les Giranaux - BP71 - 70103 Ar
c-Les-Gray CEDEX - RCS GRAY B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
®
Read carefully these instructions
before any use.
5009577C
1
GB- Hereby, SIMU, declares that this equipment “Hz-Timer” is in compliance with the essential
requirements and other relevant provision of Directive 1999/5/EC. A declaration of Conformity
is available at the web address:
www.simu.fr, heading “Normes”. Usable in EU,
General specifi
cations
1/4
first use of the timer

Simu Hz TIMER Specifications

General

Brand	Simu
Model	Hz TIMER
Category	Transmitter
Language	English

Summary

General Specifications and Setup

Technical Specifications

Details about power, frequency, range, operating and storage temperatures, and weight.

First Use of the Timer

Instructions for the initial setup and activation of the Hz-Timer device.

Setting the Timer

Time and Date Adjustment

Procedures for shifting between winter/summer time and setting current time and date.

Configuring Operating Modes

Daily and Weekly Programming

Setting identical (daily) or distinct (weekly) UP/DOWN times for weekdays.

Cosmic Mode Programming

Cosmic Mode 1 (COS1) Settings

Programming differed and hold times for automatic UP/DOWN based on sunrise/sunset.

Cosmic Mode 2 (COS2)

Using daily/weekly for UP times and COS1 for DOWN times.

Additional Operating Modes

OFF Mode

Timer acts as basic transmitter; UP/DOWN times disabled.

Random Mode SEC

Simulates presence by randomly offsetting weekly/daily programs by +/- 15 minutes.

Receiver Programming

Programming Timer to Receiver

Steps to open receiver memory and validate timer operation for existing installations.

Installation and Battery Replacement

Timer Installation Guidelines

Recommendations for placement, height, and testing to ensure optimal range and operation.

Changing Batteries

Procedure for replacing batteries and resetting the timer's time and date.