7.2 Step2 Internal Parts Disassembly
Motor and PCB Disassembly：
please also dismantle the screws at two sides,for the right side is the fasten strip
Disassembly steps for water motor :
please dismantle the screws of condensor,slide up the partition panel.and then slow take out the
condensor from the left hand side.From there, you can see the water motor.Caution, please be
note that in order to avoid any water split by water wheel, you should uphold the condensor
screws
screws
Water motor
Water wheel
To Next Page
Loading...
Need help?
General
