DC Inverter Duct Type Air Conditioner Installation and Operation Manual
29
Fig.24 Fan Mode Operation
③
DRY (Dehumidifying) Mode Operations
Connect the unit to power supply. Press the “ON/OFF” key. Press the “MODE” key to select “DRY
(Dehumidifying)” mode. Use the “Temperature” key to adjust the set temperature for the room. Refer to Fig.23.
④
Fan Mode Operation
Connect the unit to power supply. Press the “ON/OFF”key. Press the “MODE” key to select “FAN” mode.
The unit shall operate under “FAN” mode. Press the “FAN” key to select from high, medium and low speed.
Refer to Fig.24.
To Next Page
Loading...
