- - 7
Romote control operation procedure
Note:
Be sure that there is on obstruction.
Don’t drop or throw the remote control.
Don’t place the remote control in a location exposed to direct sunlight.
Whe the unit is restarted after stopped,it can automatically resume its most latest
runningmode,andtheoutdoorunitstartsalittlebitlater.
Name and Function-Remote conteol
SLEEP Button:
FAN SPEED Button:
MODEButton:
CLOCK Button:
TEMP+ TEMP- Button:
Under the COOL, DRY, FAN
or HEAT mode, press these
two buttons could set the
temperature, the temp. setting
range is １６℃－３０℃, the temp.
can be memorized under each
modes.
Under COOL, DRY, HEAT
mode, press the button once
start the SLEEP function, when
repressing once more, to stop
the function.
W hen the unit start up, under the
AUTO, COOL, FAN, HEAT mode,
press this button, could select
Auto fan, Low fan, Middle fan,
High fan, at DRY mode, the
fan speed is Low fan speed.
The FAN SPEED can be
m emorized under various
modes
At unit turned on, press this
button, the AUTO, COOL, DRY,
FAN or HEAT mode could be
selected.
When pressing this button once,
the icon of CLOCK will flash, and
that could be adjusted.
At CLOCK adjustment, press
the TIME+ once, the ones place
on the minute will be increased
1, and continuously press 1sec
above, the tens place on the
minute will be increased 1 in
every half second. When pressing
the TIME-, the ones place on the
minute will be decreased 1, and
continuously press 1sec above,
the tens place will be decreased
1 in every half second. After adjusted
please press the CLOCK button
again for confirming.
To Next Page
Loading...
Need help?
General
