6
S
wing function
The default setting value of the reminding function
is 2500 hours and it can change to be 1250 hours, 5000
hours or 10000 hours. The setting methods please refer
to the installation manual.
If the indoor unit supports s
wing
function, press the right button
to adjust the air outlet direction of
the indoor unit.
Long press this
button for 3 seconds can turn on
or turn off the auto swing function,
the swing icon
Follow Me function
When the system is running and
the operating mode is AUTO, COOL
or HEAT, press the
will activate the Follow Me function,
press this button again to deactive
the function.
Operating mode changeover will
deactive the function as well.
will be light up, the wired remote
When the Follow me function
is activated, the icon
controller will display room temperature
read from the local sensor and transmit
the temperature value to the indoor unit every 3 minutes.
Techni
que certification
and requirement
EMC should confirm the CE certification.
CAUTION
will be lighted up
when the auto swing function is turned on.
button
To Next Page
Loading...
