Sinclair SCMI-01.4 User Manual

COMMUNICATION MODULE
SCMI-01.4
USER'S MANUAL
EN

Sinclair SCMI-01.4 Specifications

General

Brand	Sinclair
Model	SCMI-01.4
Category	Control Unit
Language	English

Summary

1. Introduction

2. Safety Instructions

3. Terminals and Wiring the Units

4. Setting the Module

4.1. Using the Password

Secure access to module settings using a six-digit password for configuration changes.

4.2. Setting the Desired Temperature in the Cooling Mode

Configure the target temperature for the unit's cooling operation within a specified range.

4.3. Setting the Desired Temperature in the Heating Mode

Configure the target temperature for the unit's heating operation within a specified range.

4.4. Setting the Operation Mode of the SCMI-01.4 Control Module

Select the operating mode such as slave, autonomous pressure, or autonomous temperature control.

4.5. Setting the Evaporator Defrosting

Configure parameters for the indoor unit evaporator defrosting process, including mode, period, and temperature settings.

4.6. Setting the Output Relays and Fan Speed

Configure the functions and logic of output relays and set the indoor fan speed control modes.

4.7. Settings the Display

Adjust display parameters such as backlight brightness, contrast, idle timeout, and language.

5. Setting the SCMI-01.4 Module Using the Computer

6. Error Messages

6.1. Sensors and Communication Errors of the SCMI-01.4 Module

Identifies errors related to temperature sensors, pressure sensors, and communication failures with the outdoor unit.

6.2. Outdoor Unit Errors

Lists and explains various error codes originating from the outdoor unit, categorized by position (AA, BB, CC, DD).

7. Technical Parameters

8. Contents of Packaging

9. Summary of the Module Settings

10. Appendix – Modules

10.1. FMD Modules to Control the Indoor Fan Speed

Details FMD-01, FMD-02, and FMD-03 modules for controlling indoor fan speed via PWM signals.