2. Mode area: Indicate the main unit operating mode; details refer to its’ manual;
3. Setting temperature: 2 status can be displayed: ;
4. Timing ON/OFF indication : Indicate the timing information; details refers to page 10 of the
manual;
5. Function icon
1)
: Displays when the unit controlled by remote switch;
2) : The conflict icon.
3) : Displays when the unit is needed. Press and hold “MODE” key for 3 seconds to cancel the icon
and timing will restart until next maintenance;
4) : The reserved icon. ;
5)
: The reserved icon. ;
6) : Displays when check function is on; details refers to the manual;
7) : Displays when ambient temperature is low which means the main unit need anti-freezing action;
8) : Displays when no key operation for 2 minutes and all keys are locked. Press and hold “OK” key for
3 seconds to unlock;
9) : Displays when error or protection occurs and means the unit need maintenance by professionals.
6The unit number: The user can set the number, details refer to page 16 of the manual;
7. Water level indication: The reserved icon;
8. Clock: Under normal status displays clock; Under timing setting displays the setting timing, details refer to
page 15 of the manual;
9. Water temperature: Under normal status display water temperature; Under water temperature setting
status displays the setting value; Under check status displays check parameter, details refer to Page 9, 18 of
the manual;
10. ON/OFF key: Turn on and turn off functions, details refer to page 7 of the manual.
11. Right and Left key: Press these keys to check setting water temperature; Press right key to shift to the
next step setting under timing setting status; Press these keys to turn over the unit parameter information
under check status;
12. OK key: Press this key to confirm settings. Press and hold this key for 3 seconds to unlock under
locking status;
13. Function key: Setting water temperature, timing and clock etc, details refer to Page 9-17; Press and hold
this key for 3 seconds to enter check status, details refer to page 18 of the manual;
14. Add and Reduce key: Move up or move down values of temperature, timing etc;
15. Cancel key: Press this key to cancel parameter setting under setting status; Press and hold this key for 3
seconds to cancel timing when timing is valid;
16. Mode key: Power on the cooling function, heating function or water pump function, details refer to Page 8
of the manual.
To Next Page
Loading...
