Sinclair SWC-04 - Turbo Setting

Wi
Fi
Wi
Fi
Wi
Fi
Wi
Fi
Wi
Fi
3.10 Turbo Setting
Turbo function setting is as shown in Fig.12.
10
Press “FUNCTION” button into turbo state
Press “FUNCTION” button into turbo state
Fig.12 Turbo Setting
Turbo function: The unit at the high fan speed can realize quick cooling or heating so that the
room temperature can quickly approach the setting value.
In the Cooling or Heating mode, press FUNCTION till the unit enters the Turbo setting interface
Press “SWING/ENTER” to turn on
turbo function
When the Turbo function is activated, press FUNCTION to enter the Turbo setting interface and
then press SWING/ENTER to cancel this function.
Press “SWING/ENTER” to turn off
turbo function
SWING/ENTER
Wired Controller SWC-04