Sinclair SWC-04 User Manual

Wired Controller SWC-04
2
2
Table 1
2 Buttons
2.1 Buttons on the Wired Controller
1 3
4
5
6
7
8
Fig. 3 Buttons on the Wired Controller
Cool
1
No.
Cooling mode
Auto
2
Dry Dry mode
Fan
3
Automatic mode (under auto mode, the indoor unit will select its
operating mode according to the variation of room temperature)
Fan mode4
Display
Heat Heating mode
Sleep
5
6
7
Display when sleep function is set
Quiet
Fresh air
8
Display when fresh air function is set
9 Health
Display when quiet function is set
10
Display when health function is set
Absent
11
Display when absent function is set
12 WiFi
I-DEMAND Display when I-DEMAND function is set
13
Display when WiFi function is set
Child-lock
14 Up & down swing
Child-lock status, display when child-lock function is set
15
Display when up and down swing function is set
Slave wired
controller
16 Fan speed
17 No card
18
No card in gate control system
Left & right swing
19
Display when left and right swing function is set
Icon of slave wired controller, it will display when slave wired
controller is set (this function is unavailable for this unit)
X-fan
The fan speed set currently (including auto, low, medium low,
medium, medium high, high, and turbo)
20
Display when X-fan function is set
21 E-heater
Temperature It will display the setting temperature
On/off switch of auxiliary heating
22 Memory
23 Clean
24
Filter washing reminder (this function is unavailable for this unit)
Save
25
Display when energy-saving function is set
Defrost
26
Defrosting status
Memory status (After power failure and re-energizing the unit, it will
resume to ON/OFF status of unit before the power failure)
27 Shield
Timer
Instruction of Display
Display when timer status is set
Shielding status

Sinclair SWC-04 Specifications

General

Brand	Sinclair
Model	SWC-04
Category	Controller
Language	English