To Next Page

To Previous Page

3.11 Energy Saving Function Setting

2）Energy Saving Setting for Heating

Fig. 13 Energy Saving Function Setting

function option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the lower limit, after that,

press the SWING/ENTER button to activate this function.

Turn on energy saving function:

1）Energy Saving Setting for Cooling

When the unit runs under the COOL or DRY mode, press FUNCTION button to select "SAVE"

function option. When icon flashes, if you press SWING/ENTER button without pressing ▲ or

Cancel energy saving function:

If energy saving function has been set, press FUNCTION button on the panel to select “SAVE”

▼ button, energy saving function will be canceled; if you press SWING/ENTER button after pressing

▲ or ▼ button, energy saving function will be activated.

When the unit runs under the HEAT mode, press FUNCTION button to select "SAVE" function

option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the upper limit, after that, press

SWING/ENTER button to activate this function.

Note:

under energy saving setting mode, press “MODE” button to switch the energy saving setting for

COOL or HEAT mode.

Press “MODE” button to switch to the

Press “FUNCTION” button to select the

“SAVE” function option

Turn on the unit with the “SAVE”

function deactivated

“SAVE” setting for heating

Press “SWING/ENTER” button to

activate the “SAVE” function

Press ▲ or ▼ to adjust the lower limit

Press ▲ or ▼ to adjust the upper limit

Wired Controller SWC-04

Sinclair SWC-04 User Manual

Questions and Answers: