Sinee EM100-2R2-3B User Manual

User Manual
EM100 Mini Inverter
1
Preface
Thank you for purchasing EM100 series mini inverter.
Document No.: 31010008
Version No.:103
Issue Date: 06/03/2013
EM100 mini inverter is a compact, intuitive, reliable and performing AC variable speed
drive for 3-phase induction motors.
This manual offers the general information of installation, wiring, function parameters,
daily maintenance, and fault diagnosis of EM100 mini inverter.
It is the duty of any user to perform the appropriate, correct installation or configuration
of the optional parameters of the devices. Neither SINEE nor its distributors shall be
responsible or liable for misuse of the information contained herein or mismatching the
inverter with the motor.
In the interests of commitment to a policy of continuous development and improvement,
SINEE reserves the right to update the specification of the product or its performance, or
the content herein without notice.
More updates and information are available at www.sinee.cn.

Sinee EM100-2R2-3B Specifications

General

Brand	Sinee
Model	EM100-2R2-3B
Category	Inverter
Language	English

Summary

Safety Information

Safety Precautions

Safety warnings and precautions for installation.

Precautions

Important safety precautions for operation and disposal.

Overview

Verifying Product

Model Numbering Scheme and Nameplate

Technical Specifications

Detailed technical specifications of the EM100 inverter.

Installation

Mechanical Installation

Recommendations and site considerations for mechanical installation.

Wiring

Guidelines and safety precautions for wiring the inverter.

Keypad Operation

Keypad

Overview of the keypad, its display, buttons, and potentiometer.

Function Code Check and Editing Method

How to navigate, check, and edit function codes.

Parameter Description

F00 Group: General Parameters

Detailed description of general parameters (F00 Group).

F01 Group: Motor Parameters

Detailed description of motor parameters (F01 Group).

F02 Group: Input Terminal Function Terminals

Description of input terminal functions and their settings.

F03 Group: Output Terminal Parameters

F04 Group: Start/Stop Control Parameters

F05 Group: V/F Control Parameters

F06 Group: Auxiliary Function Parameters

F09 Group: Process PID Parameters

F10 Group: Communication Parameters

F11 Group: User Parameters

Troubleshooting

Fault and Corrective Action

Table of common fault codes, causes, and corrective actions.

Common Fault and Troubleshooting

Troubleshooting common faults and abnormal operations.

EMC (Electromagnetic Compatibility)

Maintenance and Inspection

Maintenance and Inspection

Appendix A: EM100 Modbus Communication Protocol