EasyManua.ls Logo

Sinergex Nitro 3500 - Important Warnings and Warranty; Charging Safety Warnings

Sinergex Nitro 3500
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GASES
When a NORMAL/LEAD ACID battery is being charged you may
notice bubbling in the fluid caused by the release of gas.
WANRING, THIS GAS IS FLAMMABLE. ENSURE THERE ARE
NO NAKED LIGHTS OR SPARKS.
During the charging process, the charger and battery must be
placed at a well ventilated area. DUE TO RISK OF EXPLOSION,
ONLY CONNECT AND DISCONNECT THE CHARGER DC
CLAPMS WITH THE BATTERY WHEN THE CHARGER IS
DISCONNECTED FROM AC POWER!!!
Types of Batteries
This charger is only suitable for charging the specified batteries
and should not be used to recharge non-rechargeable, NICAD or
any other type of battery.
POINTS OF NOTE
When not in use, the battery charger must be kept at a dry area to
avoid moisture. Keep away from any liquid, rain or snow at all
times.
This battery charger is not designed for installation on to the
vehicle as a fixture.
WARNING
Avoid getting ELECTROLYTE (Battery Acid) on your skin or
clothes. It is acidic and can burn skin. If this occurs, rinse the area
of contact immediately with running water.
Never charge a frozen battery. If battery fluid (electrolyte)
becomes frozen, bring battery into a warm area to allow battery to

Related product manuals