EasyManua.ls Logo

Sinergex Nitro 3500 - Charging Completion and Time

Sinergex Nitro 3500
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
advise you to consult your nearest battery service centre. If the
problem is attributable to D, all you have to do is select the
appropriate voltage and proceed to charge the battery.
3. WHEN THE BATTERY IS COMPLETELY CHARGED
When the LEDFULL” illuminates, the battery is completely
charged. The battery charger now switches to the Float mode and
doesn’t require your attention until the next time it is used. The
Nitro battery charger will automatically maintain your battery.
When the AC plug is removed from the power supply connection,
the battery charger switches off.
The battery charger automatically switches back to the “Stand By”
mode if the charger DC clamps are removed from the battery while
the AC cable is still connected to the AC power supply.
CHARGING TIME
The table below is a guide to the typical charge time for different
batter sizes of 6V/3cells or 12V/6cells battery:
Battery Size
Charging Time
20Ah
6 hours
24Ah
7 hours
30Ah
9 hours
36Ah
10 hours
44Ah
13 hours
55Ah
16 hours
75Ah
20 hours
IMPORTANT SAFETY INSTRUCTIONS

Related product manuals