WARNING! Before you install and use your Nitro
Battery Charger, be sure to read and save these safety
instructions.
INTRODUCTION
The Sinergex Nitro 3500 is member of the family of advanced
battery chargers manufactured by Sinergex Technologies.
Nitro chargers will increase your battery’s performance and
prolong its life. Please carefully read and follow the following
safety and operating instructions.
The Nitro is controlled by a 12-bit AD microprocessor with
4-stage charging characteristic for charging batteries
automobiles, motorcycles, snow mobiles, tractors, personal
watercraft, boats etc.
Suitable for charging for common Lead Acid, AGM, Gel,
Sealed and Maintenance Free batteries
NITRO 3500 Intelligent Battery Charger with 5.3 AMPS RMS
– Charges 6 or 12 VDC Batteries. 3.5 AMPS DC (5.3 A RMS)
– Automatic and Intelligent 4-Stage Charging Curve