THE BOBBIN THREAD (Continued)
Press Here
for Sewing
• Place spool of thread on spool pin.
Snap thread in the thread guide post
then lead thread around bobbin winder
tension disc, as illustrated above.
• Pass thread, from the inside, through
hole in bobbin and place bobbin on
spindle.
• push bobbin and spindle to the right
to engage the bobbin winder. Hold
thread end as shown and start the
machine, winding at moderate speed.
• Cut off thread end after a few coils
have been wound on the bobbin.
• When required amount of thread has
been wound (winding will stop when
bobbin is full), stop machine. Cut con
necting thread
• Push bobbin and spindle toward the
left to disengage bobbin winder. Re
move bobbin.
• Release hand wheel disc for sewing.
12
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
