THE NEEDLE THREAD
Lead thread
under ughx
Allow spring to return to its
normal up position and con
tinue threading the machine
Threading the Needle
1. Turn hand wheel to raise take-up lever
to its highest position, and raise presser
foot to release the tension discs.
2. Place spool of thread on spool holder
and lead thread through all points as
shown, making sure to:
• Hold thread as illustrated while guiding
thread into tension discs.
• Thread tension discs as illustrated.
® Thread takerup lever from back to front,
guiding thread down over top of lever
and then up into eyelet.
• Thread needle from front to back,
drawing about 10 cm of thread
through eye of needle.
14
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
