Singer 1030 - Finding the Beginning of a Pattern Unit; Adjusting Stitch Balance When Using Flexi-Stitch Patterns

-#&#' )'###'
+#"# #
"%#')"#%$
To start stitching one of the built-in Fashion
Stitch or Flexi-Stitch disc patterns at its begin
ning, align the start indicator on the disc
holder with the pattern-start indicator on
the machine.
To align both start symbols:
• Unthread the needle.
• Hold needle and bobbin thread ends.
• Run the machine until both symbols are
aligned.
• Release the threads.
• Thread the needle and start to sew.
Symbols
Finding Pattern Start
When Using a Built-in Stitch
&*"%#'%$ )#$
 #"%#'
,$ 
#%
When using a Flexi-Stitch pattern, you may
need to adjust the stitch-balance dial to cor
rect the appearance of the stitch.
Before you move the stitch-balance dial from
its neutral position, make a test sample. If ad
justment is required, stitch slowly and move
the stitch-balance dial as you sew.
- i
Incorrect
Correct
Incorrect
Turn the dial slowly to left (♦wwi symbol) to
bring forward and reverse stitches of the
pattern together.
Turn the dial slowly to right (
mm
-»symbol) to
separate forward and reverse stitches of the
pattern.
23
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl