Making a Thread Chain
■ Start
.Paper
Making a Thread Chain
Stay chains (sometimes calied French tacks),
beit loops and chains for cording buttonholes,
normally time-consuming hand-worked fin
ishes, can be quickly chainstitched. To pro
duce a chain, stitch on paper for desired
length, remove work from machine and tear
paper away from the stitching. Follow instruc
tions on page 31 for starting and ending stitch
ing.
Chain
—Tear Up
Releasing the Chain from the Machine
To release the chain from the machine without
locking end of stitching in fabric or paper:
• Raise take-up lever to its highest position
and raise the presser foot.
• Open slide plate and press down on finger
of bobbin-case insert.
• Draw fabric (or paper) to back of machine.
Chain will unravel as work is withdrawn.
Chainstitched Belt Loop
Chainstitched Cord
K
Releasing Chain from Machine
32
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
