Adjusting Width of Button Opening
The width of the button opening is regulated
by the stitch-width dial.
• To make button opening wider, turn diai very
slightly toward the 1 setting.
• To make button opening narrower, turn dial
very slightly toward the 2 setting.
Adjusting Width of Button Opening
Adjusting Length of Button Opening
The length of the button opening in one-step
buttonholes is controlled by the button-carrier
clamp. If the button will not pass through the
button opening of your test buttonhole, remove
the button from the carrier and slide clamp for
ward to a new setting. Use the gauge lines {Vs
inch apart) on the carrier to set length and
stitch buttonhole without a button in the car
rier.
Adjusting Length of Button Opening
When Using One-step Foot
39
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
