$ #'#' ' )")
CAUTION; Before changing light bulb, make
sure you have disconnected power-line plug
from electrical outlet.
When changing to a new bulb be sure to use a
15-watt bayonet base bulb only.
REMOVING BULB
Using thumb and forefinger of right hand, pull
down on tab located under light lens to lower
the light bracket. Do not attempt to unscrew
the bulb. Press bulb up Into the socket and
at the same time turn It over in the direction
shown to unlock bulb pin.
REPLACING BULB
Press new bulb into socket, with bulb pin en
tering slot of socket, and turn it over in direc
tion shown to lock bulb in position. Push entire
assembly up until it snaps in position.
67
Instrukcje obsługi maszyn do szycia firm Polskich jak i zagranicznych np. Singer Toyota Pfaff Gritzner Łucznik Arka
maszynykrawieckie.shophurt.pl
To Next Page
Loading...
