Need help?Do you have a question about the Singer 201-3 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Operation | Manual |
| Stitch Type | Straight |
| Bobbin | Top-loading |
| Needle System | 15 x 1 |
| Stitch Length | Adjustable |
| Presser Feet | Snap-on |
| Built-in Stitches | Straight stitch |
| Voltage | 110V |
| Motor Type | External |
Details on P.H. and B.R. motors for specific Singer machines.
Guide for connecting all leads for Machine 201-3.
Diagnosing and resolving issues related to low speed or machine failure.
Common motor problems and their causes for specific machine models.
Steps to remove the motor cover and brushes.
Reassembling the motor field core and related parts.
Steps for removing the pulley end cover and brushes.
Procedure for removing and inspecting the armature.
Reassembling the commutator end cover and field core.
Troubleshooting steps for when the motor fails to start.
Procedure for inspecting the treadle controller unit.
Adjusting the carbon resistance unit in emergencies.
Steps for removing and reinstalling the rotating hook.
To Next Page
