Singer 2010 User Manual (English)

Questions and Answers:

M
Mary AllenAug 18, 2025
Why is my Singer Sewing Machine skipping stitches?
- M
  Mark MartinAug 18, 2025
  If your Singer Sewing Machine is skipping stitches, check these potential causes: * Ensure the needle is inserted correctly, with the flat side towards the back; if not, remove and reinsert it. * The needle may be damaged; insert a new one. * You might be using the wrong size needle; choose one that suits the thread. * Make sure the foot is attached correctly; if not, check and reattach it. * The machine may not be threaded correctly; rethread it.
M
Matthew RichardsonAug 20, 2025
How to fix upper thread breaking on Singer 2010 Sewing Machine?
- K
  Kristen MillerAug 21, 2025
  If the upper thread keeps breaking on your Singer Sewing Machine, here are a few things to check: * Make sure the machine is threaded correctly; if not, rethread it. * The thread tension might be too tight; reduce it to a lower number. * The thread might be too thick for the needle; select a larger needle. * Ensure the needle is inserted correctly, with the flat side towards the back; if not, remove and reinsert it. * Check if the thread is wound around the spool holder pin; if so, remove the reel and wind the thread onto it. * The needle might be damaged; replace it.
H
hyoungAug 23, 2025
What to do if the needle breaks on my Singer Sewing Machine?
- K
  kimberly20Aug 23, 2025
  If the needle breaks on your Singer Sewing Machine, consider the following: * Insert a new needle, as the current one might be damaged. * Ensure the needle is correctly inserted with the flat side towards the back. * Use the correct needle size for the fabric and thread you're using. * Attach the correct foot for the sewing task. * Tighten the needle clamp screw firmly with a screwdriver. * Use a presser foot appropriate for the stitch you wish to sew. * Loosen the upper thread tension if it's too tight.
J
Jennifer HoodAug 26, 2025
How to stop the lower thread from breaking on my Singer Sewing Machine?
- R
  Robert BlackAug 26, 2025
  If the lower thread is breaking on your Singer Sewing Machine, try these solutions: * Remove and reinsert the bobbin case, then pull on the thread to ensure it pulls easily. The bobbin case might not be inserted correctly. * Check both the bobbin and bobbin case to ensure they are threaded correctly. * Loosen the lower thread tension if it is too tight.
D
Debbie CarlsonAug 28, 2025
What to do if my Singer Sewing Machine jams?
- J
  johnsonmaryAug 28, 2025
  If your Singer Sewing Machine jams, it might be due to thread caught in the hook. Remove the upper thread and bobbin case, then turn the handwheel backwards and forwards by hand to remove any thread remnants.
I
iwhiteAug 31, 2025
What to do if my Singer 2010 Sewing Machine doesn't operate?
- V
  Victoria MillsAug 31, 2025
  If your Singer Sewing Machine isn't operating, check these items: * Ensure the machine is turned on. * Press the Start/Stop button. * Lower the presser foot lever. * If the foot controller is connected, do not use the Start/Stop button; disconnect the foot controller to use the Start/Stop button. * Remove the upper thread and bobbin case and turn the handwheel to remove any thread caught in the hook race. * Connect the power line plug to the electrical outlet.
R
Rebekah AlvarezSep 2, 2025
Why are the stitches loose on my Singer Sewing Machine?
- J
  Jackie BrownSep 2, 2025
  If you're experiencing loose stitches on your Singer Sewing Machine, consider these points: * Check the threading of the machine to ensure it's correct. * Thread the bobbin case as illustrated in your manual. * Ensure the needle size suits the fabric and thread you're using. * Correct the thread tension.
T
Tammy StokesSep 4, 2025
What causes seam puckering on a Singer 2010 Sewing Machine?
- R
  rbonillaSep 4, 2025
  Seam puckering on your Singer Sewing Machine can be caused by: * The needle thread tension being too tight; loosen the thread tension. * The needle thread not being threaded correctly; rethread the machine. * Using a needle that is too heavy for the fabric; choose a needle to suit the thread and fabric. * A stitch length that is too long for the fabric; make the stitch denser.
A
Alicia WangSep 7, 2025
Why is my Singer 2010 so noisy?
- S
  Sarah JonesSep 7, 2025
  If your Singer Sewing Machine is making excessive noise, here are some potential causes: * Lint or oil may have collected on the hook or needle bar; clean the hook and feed dog as described in the manual. * The needle may be damaged; replace it. * A slight humming sound from the internal motor is normal. * Thread may be caught in the hook; remove the upper thread and bobbin case, turn the handwheel backwards and forwards by hand, and remove any thread remnants.
E
Elaine ReyesSep 9, 2025
How to prevent seam gathering on Singer 2010?
- A
  Anthony CoxSep 9, 2025
  To prevent seam gathering or puckering on your Singer Sewing Machine: * Select a finer needle if the current one is too thick for the fabric. * Readjust the stitch length if it's set incorrectly. * Loosen the thread tension if it is too tight.

Singer 2010 Specifications

General

Stitch Options	Decorative
Buttonhole Styles	1 (4-step)
Presser Feet	All-purpose, Zipper, Buttonhole
Included Accessories	Needles, Bobbins, Seam ripper, Screwdriver
Dimensions	12 inches