Need help?Do you have a question about the Singer 201P and is the answer not in the manual?
General| Brand | Singer |
|---|---|
| Model | 201P |
| Category | Sewing Machine |
| Language | English |
Introduction for new owners and how to maximize machine use.
Information on finding expert Singer service and representatives nearby.
Details on motor specifications and connecting to the electric service line.
Instructions for turning the sewing machine light on and off.
Procedure for safely removing and replacing the light bulb.
Guidance on choosing the correct needle and thread, and how to set the needle.
Steps for preparing the machine and starting the sewing process.
Detailed steps for guiding the thread through the upper parts of the machine.
Instructions for removing the bobbin and winding new thread onto it.
Steps for inserting and threading the bobbin case correctly.
Procedure to bring the bobbin thread up to the needle for sewing.
Key steps to begin sewing, including material placement and needle engagement.
How to change the stitch length using the stitch indicator and lever.
Techniques for basting and turning corners during sewing.
Instructions for adjusting the pressure applied by the presser foot.
How to regulate the tension of the needle thread.
Procedure for adjusting the tension of the bobbin thread.
Steps for removing and reassembling the needle thread tension components.
Advice on identifying and resolving common sewing problems.
Steps to prepare the machine for darning or embroidery work.
Method for darning flat pieces of fabric.
Guide to preparing the machine and applying oil to the correct points.
How to adjust the tension of the drive belt for optimal performance.
Steps for removing the bobbin case to clean lint and debris.
Procedure for correctly reinstalling the bobbin case into the machine.
Introduction to the foot hemmer attachment and its basic uses.
Instructions for initiating a hem at the very edge of the material.
Step-by-step guide to creating a hemmed seam using the foot hemmer.
Procedure for creating a felled seam with the foot hemmer.
Overview of the binder's functionality and its use in garment construction.
Steps to attach the binder and insert various types of binding material.
Guide to inserting fabric and adjusting the binder for optimal stitching.
Techniques for using the binder on curved edges and creating piped effects.
Method for successfully binding the outer edges of curves.
Instructions for binding the inner edges of curves.
Identification of ruffler components and essential lubrication points.
Steps for mounting the ruffler onto the sewing machine.
How to adjust the ruffler for gathering fabric with desired fullness.
Procedure for gathering fabric using the ruffler attachment.
Technique for attaching a ruffle to a garment using a facing.
How to set up the ruffler to create pleats of specific spacing.
Method for creating spaced groups of pleats using the ruffler.
Using the gathering foot to create shirring effects on fabric.
Overview of the zipper foot's design and its purpose for close stitching.
Initial steps for attaching a zipper to a garment with the zipper foot.
Final steps for stitching zippers, including the opposite edge and finishing.
Instructions for attaching and adjusting the seam guide for consistent seam widths.
Description of the automatic zigzagger for decorative and utility stitches.
Details on the buttonholer attachment for creating various sizes of buttonholes.
Information on the skirtmarker for chalk lines and the adjustable hemmer.
Information on SINGER trademarks, warranted parts, and authorized service centers.
To Next Page
