Singer 201P - Ruffler with Facing and Piping; Attaching Ruffle with Facing

2. Place material to which ruffle 1s to
be attached under separator blade
Line 1, Fig. 56.
3. Proceed same as for plain gathering.
To Make a Ruffle and Attach It
With a Facing in One Operation
1. Insert material to be ruffled between
two blue blades Line 2, Fig. 58.
[tg
My
ews
—S
—
Fig. 57.Making a Ruffle and
Astaching It In One Operation
53
2. Place material to which ruffle is to
be attached under separator blade
Line 1, Fig. 58.
3. Place facing material over upper blue
blade Line 4, Fig. 58.
RUFFLING
MATERIAL —, 2
—we
€2/0008
Fig. 58. Correct Positions for Materials
4. If facing is to be on right side of gar-
ment, place wrong sides of garment
and ruffle together
5. If facing is to be on wrong side, place
right sides of garment and ruffle
together
To Pipe a Ruffle
1 Insert material to be ruffled between
two blue blades Line 3, Fig. 60.