Singer 201P - Electrical Information; Motor and Power Connection

ELECTRICAL INFORMATION
Motor
The SINGER‘? electric motor, located at
back of machine, is regularly furnished
for operation from a 250 volt direct cur-
rent or alternating current, 25 to 75
cycles, supply. Motors are also avail-
able for operation on AC and DC from
supplies having a voltage other than
250. Special motors can be furnished for
32 volt direct current.
To Connect Machine to Electric Service Line
Before connecting the machine to elec-
tric service line, be sure that the voltage
and the number of cycles stamped on the
motor nameplate are within the range
marked on the electric meter instafled
by the electric power company.
Push terminal plug into the three-pin
terminal body (see Fig. 2, page 4) at
the right of machine and connect plug at
other end of cord to an electric outlet.
CAUTION
When you have finished your sewing, always dis-
connect plug from electric outlet.
5