Singer 201P - Preparing for Sewing; Drawing Up Bobbin Thread

TO PREPARE FOR SEWING
Hold end of needle thread with left hand
and turn hand wheel over toward you
eo OFS S74
Fig. 17. Drawing Up Bobbin Thread
16
until needle goes down and up again
and thread take-up lever 5, Fig. 19 is
at its highest point. Pull up needle
thread and bobbin thread will come
with it, as shown in Fig. 17.
Lay both threads
back under presser ul
foot diagonally We\up eT
across the feed, as
shown inFig.18,to a
the right or left, de- \\ \ WW
pendinguponwhich = 924%
side of needle» the
material is to be lo- rem
cated, so that when presser foot is low-
ered, threads will be firmly held between
the feed and the presser foot.