Singer 201K - Electrical and Manual Machine Operation; Electrical System and Connections

75 pages

Save Page as PDF

To Next Page

To Previous Page

Main Page

Singer Service5
Electrical Information6
Electric Motor6
Electrical Connections for Machine6
Before Inserting Electric Plug6
Singer Light7
To Turn Light on and off7
To Remove Bulb8
To Insert New Bulb8
Locking or Unlocking Bulb Pin8
If Machine Is Electrically Operated9
Front View of Machine9
If Machine Is Hand Operated10
To Operate the Hand Machine10
If Machine Is Treadle Operated11
Belt Shifter11
Needles and Thread12
To Set the Needle12
Chart Showing the Relationship of Types of Fabrics, Thread and Needle Sizes and Machine Stitches to the Inch13
Upper Threading14
To Remove Bobbin15
To Wind Bobbin15
To Replace Bobbin17
Adjustment of Bobbin Winder17
Threading the Bobbin Case17
Bobbin Case Threaded18
Under Threading Completed18
To Prepare for Sewing19
Drawing up the under Thread19
To Start Sewing20
To Turn a Corner21
To Sew Bias Seams21
Basting21
To Remove the Work22
To Regulate Length of Stitch and Direction of Feed22
To Regulate Pressure on Material23
Thread Tensions23
Thumb Screw for Regulating Pressure on Presser Foot23
To Regulate Needle Thread Tension24
To Regulate Bobbin Thread Tension25
To Disassemble Needle Thread Tension26
To Reassemble Needle Thread Tension27
Tension Disc Assembly27
To Adjust Needle Thread Tension28
Reassembling Needle Thread Tension28
To Adjust Tension on Thread Take-Up Spring29
If Correct Stitching Is Not Obtained30
Darning31
Embroidery31
Sewing Suggestions32
Protection against Rust Damage33
To Oil Machine and Stand34
Front View, Showing Oiling Points34
Face Plate Removed, Showing Oiling Points35
Oiling the Sewing Hook35
Oiling Points in Bed of Machine36
To Clean Stitch Forming Mechanism37
To Remove Bobbin Case37
To Replace Bobbin Case38
Instructions for Using the Attachments39
Foot Hemmer40
How to Start the Hem at the very Edge40
Making a Hemmed Seam with the Foot Hemmer42
Making a Felled Seam with the Foot Hemmer43
To Hem and Sew on Lace in One Operation44
Adjustable Hemmer45
How to Make Hems45
How to Make Hems Wider46
Binder47
The Adjustment and Operation of the Binder47
To Bind with Dress Braid47
To Make French Folds47
Binding Outside Curves48
Binding Inside Curves49
Sample of Outside Curve49
Sample of Inside Curve49
Edge-Stitcher50
Adjusting the Edge-Stitcher50
A Combined Edge-Stitching, Lace-Joining and Piping Attachment50
Sewing Lace Together with the Edge-Stitcher51
Piping with the Edge-Stitcher52
Applying Bias Folds with the Edge-Stitcher53
Stitching a Wide Hem with the Edge-Stitcher54
Making a French Seam54
Tucking with the Edge-Stitcher55
Gathering Foot56
To Shirr with the Gathering Foot56
Shirring57
Smocking57
Principal Parts of the Ruffler58
To Attach the Ruffler to the Machine59
To Adjust Ruffler for Gathering59
To Make a Ruffle and Sew It to a Garment in One Operation60
To Make a Ruffle and Attach It with a Facing in One Operation61
To Pipe a Ruffle62
To Adjust Ruffler for Pleating63
To Adjust Ruffler for Group Pleating64
To Oil the Ruffler65
Fashion Aids66
Automatic Zigzagger66
The Buttonholer67
Bias Gauge68
The Quilter68
Seam Guide69
Tucker69
The Zipper Foot70
Applications70
Index72

Singer 201K - Electrical and Manual Machine Operation; Electrical System and Connections

Table of Contents

Other manuals for Singer 201K

Related product manuals