15
Zigzag Sewing Machine | Instruction Manual and Parts List
3.11
Bobbin Case
Threading and
Replacement
Figure 18
Hold bobbin case by latch ‘1’ and
place it on spindle of bobbin case
holder ‘2’ so that position finger ‘3’
enters notch ‘4’ at right of bobbin
case holder (see Figure 18).
Release latch and press bobbin case
firmly in place to assure proper
position. Close bed slide.
Caution
Switch off the
machine.
Do not run
machine with-
out closing bed
side. Danger of
injury!
1
3
4
2
To Next Page
Loading...
