To Next PageTo Next Page
Need help?Do you have a question about the Singer 2802 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Number of Stitches | 8 |
| Buttonhole Type | 4-step |
| Needle Type | Universal |
| Sewing Speed | 750 stitches per minute |
| Bobbin Type | Class 15 |
How to check and adjust the end play of the vertical shaft.
Adjusting bevel gear meshing and arm shaft end play for smooth operation.
Adjusting clearance between disc and follower for optimal performance.
Checking and adjusting radial play in the cam stack for smooth operation.
Addressing looseness in the take-up lever and needle bar link.
Checking and adjusting the needle bar bearings for smooth movement.
Adjusting the vertical position of the needle bar for proper stitch formation.
Adjusting the timing of the needle bar's lateral movement during zig-zag.
Procedure to ensure the needle is centered during zig-zag stitches.
Ensuring the needle is correctly positioned within the needle plate slot.
Adjusting the proximity of the needle to the hook for reliable stitch formation.
Adjusting the stop for the maximum zig-zag stitch width.
Adjusting the safety stop for the needle bar in its left position.
Ensuring correct height and alignment of the presser bar.
Adjusting the tension of the hook drive belt for optimal performance.
Synchronizing the hook rotation with the needle movement.
