To Next PageTo Next Page
Need help?Do you have a question about the Singer 2808 and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Stitch Options | 8 |
| Buttonhole Type | 1-Step |
| Maximum Stitch Width | 5 mm |
| Maximum Stitch Length | 4 mm |
| Foot Control | Yes |
| Buttonhole Styles | 1 |
| Built-in Needle Threader | No |
| Drop Feed | Yes |
| Free Arm | Yes |
| Included Presser Feet | Zipper Foot, Buttonhole Foot |
Detailed procedure for removing and replacing the needle bar.
Steps for removing and reinstalling the head end assembly of the sewing machine.
Procedure for removing and replacing the take-up lever and needle bar connecting link.
Instructions for removing and replacing the cam stack assembly.
Detailed steps for removing and replacing the arm shaft and horizontal bevel gear.
Guide for removing and replacing the pattern selector assembly.
Instructions for removing and replacing the thread tension assembly.
Steps for removing and replacing the motor and its drive belt.
Procedure for removing and installing the sewing machine hook assembly.
Procedure for checking and adjusting vertical shaft end play.
Instructions for adjusting bevel gear mesh and arm shaft end play.
Steps for setting the correct needle bar height for optimal stitching.
How to adjust the needle position relative to the hook point for proper stitch formation.
Procedure for setting the correct presser bar height and alignment.
Procedure for synchronizing the hook and needle timing.
How to adjust the needle thread tension for proper stitch formation.
Procedure for setting the stitch length to zero feed.
Procedure for setting the stitch length to zero feed.
