Singer 2802 - Page 25

Removal:
Replacement:
Removal:
Replacement:
1. Remove arm top cover and the stitch width bracket assembly.
2. Remove screw (A) and eccentric bushing (B).
3. Remove lever (D) and spring (C).
1. Replace these parts the same way as described above, but in a reverse order.
1. Remove arm top cover.
2. Remove retaining ring (A) and spring (B).
3. Pull the follower (C) up to remove it.
1. Replace these parts the same way as described above, but in a reverse order.
Disc Follower
Disc Follower Quick Out Lever
Service Manual
24
Rev. n . o
358487-001 Mar./2005
Except 2802/2852
Except 2802/2852