Singer 3116 Simple User Manual

* The darning foot is an optional accessory not included with
your machine.
Set the pattern selector dial to " ".
Remove the presser foot clamp. (1)
Attach the darning foot to the presser foot holder. The lever (A)
should be behind the needle clamp screw (B). Press the
darning foot on firmly from behind with your index finger and
tighten the screw (C). (2)
First sew around the edge of the hole (to secure the threads) (3).
First row: Always work from left to right. Turn work by 1/4 and
oversew.
A darning ring is recommended for easier sewing and better
results.
Free motion darning is accomplished without the sewing
machine internal feed system. Movement of the fabric is
controlled by the operator. It is necessary to coordinate
sewing speed and movement of fabric.
Move the drop feed control to right to lower the feed dogs.
Note:
Free motion darning
64
GB
a
b
a
b
1
A
B
C
2
3

Singer 3116 Simple Specifications

General

Presser Foot	Snap-On
Free Arm	Yes
Type	Mechanical
Adjustable Stitch Length	Yes
Adjustable Stitch Width	No
Reverse Stitch	Yes
Buttonhole Styles	1
Stitch Applications	Basic, Decorative, Stretch
Stitch Options	Basic, Decorative, Stretch
Presser Feet	All-Purpose Foot, Buttonhole Foot, Zipper Foot
Included Accessories	Needles, bobbins, screwdriver, seam ripper, spool cap
Buttonhole Style	1-step