Singer 457 - Stitching and Finishing Buttonholes; Zipper Insertion

42
-_ Procedure
4
.
.fA

Si
.wd .-
` CB
BUTTONHOLES
(Continued)
Set the pattern selector at WPAYAW
,
needle position selector at L, and
stitch width selector at the width
desired for the side stitching .
Place
work under needle, aligning
center
marking of
buttonhole with notch in
the
special purpose foot .
Side Stitching
Position
needle in fabric at point A .
Lower foot and stitch to end of
marking . Leave needle in fabric at
point B . Raise foot and pivot work
on needle . Lower foot . Take one
stitch without changing width set-
ting,
bringing work to point C .
Bar Tack
Adjust stitch width selector for bar
tacks and take at least six stitches .
Stop at point D .
Side Stitching
Readjust stitch width selector for
side stitching . Complete work
to
point E .
Leave needle in fabric .