SlNGER
I
8. Topass
the
thread
through
the
spiral thread guide,
start
operation
from
the
left,
making a
circular
clockwise movement
with
your hand
twice.
The
thread
shall slide inside
the
center
of
the
spiral
(illustration
7).
9.
Pass
the
thread through
the
last thread guide and
turn
hand wheel
toward
you
until
needle is in
its
highest position. Lower press
foot.
10. Lower needle threader lever slightly down and
pass
the thread through the guide as shown in the
illustration 8. Continue lowering the lever
until
hook
pass
inside the needle eye.
7
8
11. Insert thread in the hook slot and lead
it
slightly up
(illustration 9).
12. Loosethe lever slightly up and the thread
will
pass
through the needle eye automaticaly.
13. The thread
will
produce a loop.
Pullloop
about 10
em, opening
it
with
your fingers.
Note: We recommend to set machine in the straight
stitch position, the needle in central and in its
highest position, and the press foot lowered to
make this operation easier.
9
~J
10
To Next Page
