Singer 9800 - Connecting and Packing Away; Connecting the Foot Control; Accessory Tray Usage; Packing Away the Machine

_______________
Connecting/Packing
away
_____________________
In the plastic box
you
will
find the
foot control cord
and the main
cord,
1. Remove
the foot control cord,
2. Fit the
plug
into the socket inside
the foot control compartment,
see
poure
on the
box,
3.
Give it a
push
to make
sure
it is
properly
connected.
This
operation
is
only neccessary
the
very first time
you
are
going
to use the macme.
4. Plug
it into
the
front socket next
to the
main
cord,
In the Accessory Tray
there
are
spe
cial pockets
for presser feet
and
bobbins
plus space for other
ac
cessories. Store the accessories
in
the tray from the beginning
so they
are always
easily
accessible
(refer
to the figure).
Icc.jfl
cwcy
ct
sewing
L Unplug
the
cords from the wall
socket
and the machine.
2.
Wind
the cords around
your
hand and place
the cords
in the
foot control storage
space.
3.
Check
to
ensure that all
acces
sories
are in the accessory tray.
Slide it
onto the machine.
4. Lower the presser foot.
5.
Hang the foot
control,
underside
toward
you,
on the guide at
the
back of the
machine. Fold down
the
handle and replace
the
cover.
ha oo
ccntro
Accessor/ iy
8