66
7. Machine will sew the buttonhole in the order as
shown and stop automatically after sewing.
8. Raise the presser foot and cut thread.
b. To sew over same buttonhole, raise presser
foot to return to original position.
9. Cut center of buttonhole being careful not to cut
stitches on either side. Use a pin as a stopper.
CAUTION: To prevent accidents.
When using seam ripper, do not put your finger in
the path of ripper.
A. Note:
For butthonholing hard-to-sew fabrics or along the
edge of a multi-layered garments, install the
underplate to create perfect button-holes. Place
the fabric between the underplate and buttonhole
foot.
123456
12 345
1234
12 345
1234
1234
1234
1234
1234
123
9940EFSt.pm6 2003.9.10, 8:32 PM66
To Next Page
Loading...
