-2 -
INDEX
Sec. 1 Disassembling of covers - - - - - - - - - - - - - - - - - - - - - - 4-9
Sec. 2 Test mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10-12
Sec. 3 Adjustment of feed dog height - - - - - - - - - - - - - - - - - - 13
Sec. 4 Needle bar height - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Sec. 5 Needle threader height - - - - - - - - - - - - - - - - - - - - - - - 15-16
Sec. 6 Presser foot height and direction - - - - - - - - - - - - - - - - 17
Sec. 7 Needle position at zigzag stitching - - - - - - - - - - - - - - - 18
Sec. 8 Clearance between needle and shuttle - - - - - - - - - - - - 19-20
Sec. 9 Needle timing to feed dog - - - - - - - - - - - - - - - - - - - - - 21
Sec. 10 Needle timing to shuttle hook - - - - - - - - - - - - - - - - - - 22
Sec. 11 Needle stopper at right position - - - - - - - - - - - - - - - - 23
Sec. 12 Adjustment of thread tension - - - - - - - - - - - - - - - - - - 24
Sec. 13 Zigzag bight & stitch balance - -- - - - - - - - - - - - - - - - - 25-38
Sec. 14 Needle stops at heighest position - - - - - - - - - - - - - - - 39
Sec. 15 Bobbin holder stopper spring- - - - - - - - - - - - - - - - - - 40-41
Sec. 16 Motor belt tension- - - - - - - - - - - - - - - - - - - - - - - - - - 42
Sec. 17 Timing belt tension- - - - - - - - - - - - - - - - - - - - - - - - - 43
Sec. 18 Bobbin holder thread tension- - - - - - - - - - - - - - - - - - 44
To Next Page
Loading...
