Singer Futura CE-200E User Manual

Service Manual
CE-200E
104 72 86-26
31 july 2007

Singer Futura CE-200E Specifications

General

Brand	Singer
Model	Futura CE-200E
Category	Sewing Machine
Language	English

Summary

1. Removing cover for circuit board

2-1. Removing face, bottom and base covers

2-2. Removing face, bottom and base covers

3. Removing top cover and thread sensor cover

4. Removing rear cover

5. Removing front cover

6-1. Removing control panel assembly

6-2. Removing control panel assy. (continued)

7. Test mode A of sewing machine with thread sensor deactivated

8-1. Test mode B of sewing machine for continuous running

8-2. Test mode B of sewing machine for continuous running (continued)

9. Needle bar height

10-1. Needle threader height

10-2. Needle threader height (continued)

11. Presser Foot Height

12. Feed-dog height

13. Feed-dog timing (vertical movement)

14. Feed timing (horizontal movement)

15. Positioning of pulse motor for feeding at origin point

16-1. Adjustment of “0” feed

16-2. Adjustment of "0" feed (continued)

14. Adjustment of needle at center position

18. Positioning of stopper for needle at right position

19. Needle timing to shuttle

20-1. Needle clearance to shuttle

20-2. Needle clearance to shuttle (continued)

21. Positioning of zigzag pulse motor at origin point

22-1. Retaining bracket for bobbin case

22-2. Retaining bracket for bobbin case (continued)

23. Upper thread tension unit

24. Position of buttonhole sensor lever

5. Tension of pulley belt

26. Oiling in Shuttle area and Needle bar

27. Tension of timing belt

28. Adjustment of needle position when machine stops

29. Sensors for thread breakage

30. Sensor-A on top cover

31. Sensor-B at check-spring on thread guide plate

32-1. Checking sensor when machine stops very often

32-2. Checking sensor when machine stops very often (continued)

33. Flow chart of sensor function

34. Connecting embroidery unit to machine

35-1. Test mode B for sewing machine with embroidery unit for continuous running

35-2. Test mode B for sewing machine with embroidery unit for continuous running (continued)

36. Recognizing hoop size

37-1. Mechanical origin point and maximum moveable area

37-2. Mechanical origin point and maximum moveable area (continued)

38. Wiring diagram

39. Main circuit board and functions of each connector

40-1. Control circuit board and functions of each connector

41. Connecting wire to switch board

42. List of electronic parts