Singer H74 - Making Corded Buttonholes; Corded Buttonhole Technique

42
When sewing corded buttonholes, hook a heavy thread or cord under the buttonhole
foot.
Please Note: It is suggested that you use interfacing on the backside of the fabric.
Once sewing is completed, pull the gimp
thread gently to remove any slack, then trim
off any excess.
2
Attach the buttonhole foot and hook the
gimp thread onto the back of the presser
foot. Bring the two gimp thread ends to the
front of the foot and insert them into the
grooves, then temporarily tie them there.
Lower the presser foot and start sewing.
Set the stitch width to match the diameter of
the gimp thread.
1
2
1
BUTTONHOLE SEWING
Making corded buttonholes