10
ENGLISH
Cautions!
1. Do not remove the fl oat from the water tank; otherwise, the machine
will not stop to work when the water tank is full. Then the water will
overfl ow and that may damage your fl oor.
2. Drain the water collection tank completely when water tank is full
and reset your setting
3. If the water tank is dirty, clean by cool water or warm water, cannot
use cleaner, steel wool, chemical rag duster, gas oil, benzene, thin-
ner or other solvent to clean it, otherwise, it would damage the water
tank and lead to leakage
4. When placing the water tank back to the unit, please use two hands
to push the water tank into the machine to the correct position. Or
the water full indication will still show red and the machine cannot
work.
To Next Page
Loading...
