6
ENGLISH
KNOW YOUR STEAM STATION
A. Water tank
B. Iron lock
C. Steam button lock
D. Steam button
E. Temperature knob
F. Heating lamp
G. Steam lamp
H. ON/OFF Power switch
BEFORE FIRST USE
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Put the power cable into the socket.
Note: Make sure the voltage which is indicated on the device matches the
local voltage before connecting the device.
3. Place your steam generator on a stable, horizontal heat-resistant surface.
4. Never use the steam generator when water tank is empty, refi ll it before
use it again.
5. Always make sure the continuous steam button is in the off position
before you will turn on the appliance. Only use the steam functions when
the appliance is preheated otherwise the water will not evaporate and the
appliance will leak water.
6. Heat up the iron to maximum temperature and iron over a piece of damp
cloth for several minutes for the purpose of removing any residue on the
soleplate according to the section of Steam ironing.
NOTE: It is normal that strange odor comes out from the unit for the fi rst
use. This will cease after a short while.
NOTE: Some particles may come out of the soleplate when you use the
iron for the fi rst time. This is normal; the particles are harmless and stop
coming out of the iron after a short while.
To Next Page