Singer SteamWorks Pro - Crease Attachment Assembly and Use; Fabric Brush Assembly and Use

5
Crease Attachment Assembly and Use
Turn the steamer off and wait until there is no steam coming from the Steam •
Head. And it is completely cool to the touch.
Connect the flute of the Crease Attachment to the pegs at the bottom of the •
Steam Head.
Push the Crease Attachment into place gently until it clicks?•
To use, place the fabric between the Steam Head and the Crease Attachment to •
create the crease. Move the Steam Head in a vertical motion to press the crease.
Fabric Brush Assembly and Use
Turn the steamer off and wait until there is no steam coming from the Steam •
Head and it is completely cool to the touch.
Insert the pegs on the Fabric Brush into the holes in the Steam Head.•
Steam as usual, using the Fabric Brush to smooth stubborn wrinkles. •