6
wARNINg: ALWAYS TURN OFF THE STEAMER BEFORE ATTACHING
ACCESSORIES TO AVOID INJURY.
Folding Hanger Assembly
Secure the Steam Head Hanger assembly to the Telescopic Pole. •
Tilt the hook of the Rotating Hanger and insert it into the hole on the flat side •
of the Steam Head Hanger. Press gently to lock.
Pull the arm of the Rotating Hanger up until the sides are completely extended.•
Lock the horizontal bar in place by aligning the dots on the bar. •
Garment Clips Assembly and Use
Snap the Garment Clips into the holes on the horizontal bar of the Folding Hanger. •
Clip the Garment Clip Bar to the bottom of the Telescopic Pole. •
To use, hang the garment from the top clips and secure with the bottom clips, •
pulling the garment taut to steam or crease.
To Next Page
