Sfaira ONE GNSS Receiver User Manual
5 Connect with GIS Software
The Sfaira ONE receiver is very suitable for GIS measurement. Compared to ordinary receivers, it
has smaller size, lighter weight, and retains powerful performance. If you want to use Sfaira ONE
and other GIS software for measurement, please follow the following steps. Let's take Qfield as an
example.
First, you should connect Sfaira ONE with SingularPad, and setup it to get a fixed solution.
Second, In the software setting, enable the location services, it will share the high precision
positioning data to the controller.
Go to the system settings of your controller, click the system version 5 times to open the developer
option. In the developer option, there is a function Select mock location app, this function will use
the position from the app as the position of controller, and you should select SingularPad.
After that, you can go to Qfield, choose the Positioning Device as internal device, it will use the
position of the controller which is RTK fixed position from the Sfaira one.
Then you can do your GIS work.
To Next Page
Loading...
