EasyManua.ls Logo

SingularXYZ sfaira ONE - Setup of the Sfaira ONE; Environment Requirements; Power Supply

SingularXYZ sfaira ONE
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sfaira ONE GNSS Receiver User Manual
3
2 Setup of the Sfaira ONE
2.1 Environment Requirements
To keep the receiver with a reliable performance, it is better to use the receiver in safe
environmental conditions:
Operating temperature:-45℃to+75℃
Storage temperature:-55℃to+85℃
Out of corrosive fluids and gases
With a clear view of sky
Do not expose to water for a long time
2.2 Power supply
The Sfaira ONE GNSS receiver comes with a large 4800mAh rechargeable Lithium-ion battery
that supports Type-C charging.The internal battery provides you an effective survey workflow
with about 16-hours operating times as a rover. However, this operating time varies based on
environmental conditions.
Receiver Safety
Charge and use the Receiver only in strict accordance with the instructions below:
Do not use or charge the Receiver if it appears to be damaged. Signs of damage include,
but are not limited to, discoloration, warping, and leaking Receiver fluid.
Do not expose the Receiver to fire, high temperature, or direct sunlight.
Do not immerse the Receiver in water.
Do not use or store the Receiver inside a vehicle during hot weather.
Do not drop or puncture the Receiver.
Do not open the Receiver or short-circuit its contacts.
- Charging the Lithium-ion Receiver
Please use Type C cable for charging. Please obey the following instructions when charging
your batteries:
Charge the Receiver completely before using it for the first time.
Fully charge takes approximately 2 hours per Receiver at room temperature.
If the Receiver has been stored for a long time, charge it before your fieldwork.
Re-charge the Receiver at least every three months if it is to be stored for long time.
- Storage of the Lithium-ion Receiver
Keep receiver in dry and room temperature conditions.
Power light status:
Power on and not charging: keep red when power is more than 10%, flash red when less than
10%.
Charging: Keep green when it is fully charged, flash green when it is charging.

Related product manuals