GTZZ15J Operation Manual 10-1 © Nov. 2022
10 DECALS/NAMEPLATES INSPECTION
Use appropriate inspection methods to check that all
decals are easy to identify and properly placed.
Replace any lost or damaged safety decals.
Clean safety decals with neutral soap and water. Do not
use solvent-based cleaners, which can damage safety
label materials.
Do not operate machines with missing decals/
nameplates.
UNSAFE OPERATION HAZARD
All safety labels must be legible to alert
personnel of safety hazards. Replace
any illegible or missing labels
immediately. Safety labels removed
during any repair work must be replaced
in their original positions before the
engine is placed back into service. Do
not operate the engine if there are
missing or badly worn safety labels.
To Next Page
Loading...
