-17-
If the display fails or the performance dramatically changes, check the display in
accordance with the following instructions. Remember to check the peripherals to
pinpoint the source of the failure. If the display still fails to perform as expected,
contact the dealer for assistance.
No Power
No Sound
Remote No Response
Symptom
DEALING METHOD
TV set needs to
be cleaned
Some Interference In
The VGA Mode
Abnormal Color
The Screen Flashes
In VGA Mode
Check the power connection.Pull the plug out, wait for 60 seconds,
then reconnect the power and turn on the set.
Increase the volume. Check if the set is on the mute state or not.
Check the voice setting condition. Check the voice mode setting
condition.
Check the effect of the batteries. If necessary, replace the
batteries or clean the remote control sensor window. The distance
between the set and the remote control should be less than 6 meters.
The parameter is too big.Please use safety mode when restarting the PC
and set the parameter of the monitor according to the instructions.
Modify the parameter of the monitor according to the instruction manual.
Check the antenna connection.
Please pull the plug out when cleaning the LCD screen. Using soft,
clean cloth to wipe it off. If needed to clean further, please use dry cloth,
do not use naphtha or other thinners liquids.
Simple Troubleshooting
To Previous Page
Loading...
