15 | Page
No water flow or low
water flow
Closed valve or clogged
filter or safety screen
Open valve. Clean filter
and screen.
Error Code: B1 Inlet Flow Sensor
and check to see if
anything is stuck in the
flow sensor. Verify
screen is clean. Contact
Error Code: B2
Outlet temperature
sensor
Replace sensor. Contact
support.
WARRANTY
BUYER’S REPRESENTATION AND LIMIATATIONS OF LIABILITY
By accepting and installing the Product, Buyer expressly acknowledges the
terms and conditions of the Manufacturer Warranty and hereby expressly
accepts and agrees to the Warranty, Representations and Limitations of
Liability as set forth below.
Manufacturer warrants that the hot water generator and its components as
manufactured by the
Manufacturer (the "Product”) shall be free from defects
in materials and workmanship, under
normal use and service for the period of
time identified below beginning from the date of
Purchase. MANUFACTURER
MAKES NO WARRANTY TO BUYER WITH RESPECT TO HE WORK OR
MAINTENANCE (other than set forth above) AND CUSTOMER
DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING,
WITHOUT
LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS
FOR A PARTICULAR PURPOSE.
To Next Page
Loading...
Need help?
General