Instruction for work
18
4. Traffic regulations
4.1 Transporting the rotary tedder on the roads
– When driving on public roads and paths
consider the local traffic regulations.
Proper equipment is available at your
SIP-seller.
4.2 Front axle load
Enclosure B standard SIST EN ISO 4254 –10
Due to the mass of the machine itself, the tractor-
rotary tedder and rake combination may become
unstable. In order to verify the total stability, the
following expression can be applied for the calculation
of the minimum ballasting at the front I
F,min,
which
allows to have a weight on the front axle equal to 20%
of the unladen weight of the tractor:
I
F, min
=
ba
b)xTx(0,2b)x(Td))(cx(I
EFR
15
3 4
16
To Next Page
Loading...
General